Laboratory and Process Analyzers
Cold Behaviours: Cloud and Pour Point Refrigerator • CFPP - Cold Filter Plugging Point • Freezing Point of Antifreeze and Coolants • Freezing Point of Aviation Fuels • Freezing Point Refrigerator
Cloud and Pour Point
Refrigerator
ASTM D97 - ASTM D2500 - ASTM D5853 - ASTM D6922
DIN 51428 - DIN 51597
IP 15 - IP 219 - IP 309
ISO 3015 - ISO 3016
Pour Point of Petroleum Products
This test method is intended for use on any petroleum product. Suitable for black specimens, cylinder stock, and non-distillate fuel oil and for testing the fluidity of a residual fuel oil at a specified temperature is described.
Cloud Point of Petroleum Products
This test method covers only petroleum products that are transparent in layers 40 mm in thickness, and with a cloud point below 49°C.
Homogeneity and Miscibility in Automotive Engine Oils (D6922)
Determination if an automotive engine oil is homogeneous and will remain so, and if it is miscible with certain standard reference oils after being submitted to a prescribed cycle of temperature changes.
Pour Point of Crude Oils
LT/RB-53100/M
Manual apparatus for Pour Point of petroleum products, 5 temperatures
- Floor model instrument made in die-casted aluminium covered by special plastic material fitted with four wheels allowing movement.
- 5 × dry aluminium block bath with 4 wells each for accommodation of glassware and a small for 1 thermometer each block.
- Low-voltage anti-condensing system and 20 stand by covers made in plastic material.
- Motor compressor system with CFC free gases.
- 5 × digital thermo-regulator with PT100 A class grant resolution and precision of 0,1°C.
- Standard block temperature configuration:
| 1° position |
2° position |
3° position |
4° position |
5° position |
| Ambient to 0°C |
Ambient to -18°C |
Ambient to -33°C |
+60°C to -51°C |
+60°C to -69°C |
- Optionally available: heating on first 3 positions.
Power supply
Power consumption
Inrush current
Dimensions
- width 170 cm
- depth 60 cm
- height 92 cm
Weight
LT/RB-50000/M
Manual apparatus for Pour Point of petroleum products, 4 temperatures
- Floor model instrument made in die-casted aluminium covered by special plastic material fitted with four wheels allowing movement.
- 4 × dry aluminium block bath with 4 wells each for accommodation of glassware and a small for 1 thermometer each block.
- Low-voltage anti-condensing system and 16 stand by covers made in plastic material.
- Motor compressor system with CFC free gases.
- 4 × digital thermo-regulator with PT100 A class grant resolution and precision of 0,1°C.
- Standard block temperature configuration:
| 1° position |
2° position |
3° position |
4° position |
| Ambient to 0°C |
Ambient to -18°C |
Ambient to -33°C |
+60°C to -51°C |
- Optionally available: heating on first 3 positions.
- Optionally available: (on last position) lower temperature up to -69°C.
Power supply
Power consumption
Inrush current
Dimensions
- width 140 cm
- depth 60 cm
- height 92 cm
Weight
LT/RB-50000-W/M
Manual apparatus for Pour Point of petroleum products, 4 temperatures
- Floor model instrument made in die-casted aluminium covered by special plastic material fitted with four wheels allowing movement.
- 4 × small bath with 4 wells each for accommodation of glassware and a small 1 for thermometer/pouring medium liquid.
- Low-voltage anti-condensing system and 16 stand by covers made in plastic material.
- Motor compressor system with CFC free gases.
- 4 × digital thermo-regulator with PT100 A class grant resolution and precision of 0,1°C.
- Standard block temperature configuration:
| 1° position |
2° position |
3° position |
4° position |
| Ambient to 0°C |
Ambient to -18°C |
Ambient to -33°C |
Ambient to -51°C |
Power supply
Power consumption
Inrush current
Dimensions
- width 140 cm
- depth 60 cm
- height 92 cm
Weight
LT/RB-53300/M
Manual apparatus for Pour Point of petroleum products, 3 temperatures
- Floor model instrument made in die-casted aluminium covered by special plastic material fitted with four wheels allowing movement.
- 3 × dry aluminium block bath with 4 wells each for accommodation of glassware and a small for 1 thermometer each block.
- Low-voltage anti-condensing system and 12 stand by covers made in plastic material.
- Motor compressor system with CFC free gases.
- 3 × digital thermo-regulator with PT100 A class grant resolution and precision of 0,1°C.
- Standard block temperature configuration:
| 1° position |
2° position |
3° position |
| Ambient to 0°C |
Ambient to -18°C |
Ambient to -33°C |
- Optionally available: heating on first 3 positions.
Power supply
Power consumption
Inrush current
Dimensions
- width 110 cm
- depth 60 cm
- height 92 cm
Weight
LT/RB-54000/1-M
Manual apparatus for Pour Point of petroleum products, single temperature
- Bench top instrument with metallic case structure painted with anti-acid products and vibration-free feet.
- Dry aluminium block bath with 4 wells for accommodation of glassware and a small 1 for thermometer.
- Low-voltage anti-condensing system and 4 stand by covers made in plastic material.
- Motor compressor system with CFC free gases.
- Digital thermo-regulator with PT100 A class grant resolution and precision of 0,1°C.
- Available working temperature: from +60°C up to -45°C.
Power supply
Power consumption
Inrush current
Dimensions
- width 66 cm
- depth 60 cm
- height 42 cm
Weight
LT/RB-54000/2-M
Manual apparatus for Pour Point of petroleum products, single temperature
- Bench top instrument with metallic case structure painted with anti-acid products and vibration-free feet.
- Dry aluminium block bath with 4 wells for accommodation of glassware and a small 1 for thermometer.
- Low-voltage anti-condensing system and 4 stand by covers made in plastic material.
- Motor compressor system with CFC free gases.
- Digital thermo-regulator with PT100 A class grant resolution and precision of 0,1°C.
- Available working temperature: from +60°C up to -69°C.
Power supply
Power consumption
Inrush current
Dimensions
- width 66 cm
- depth 60 cm
- height 42 cm
Weight
Accessories
- LAB-100-332: digital stopwatch
- LAB-100-491: test jar
- LAB-100-492: cork cover
- LAB-100-493: cork disk
- LAB-100-494: insulating gasket
- LAB-200-254: manual CFPP EN116 / IP309
- SP-302-SA: air pump
- T-AS5C: thermometer ASTM 5C - IP 1C
- T-AS6C: thermometer ASTM 6C - IP 2C
Spare Parts
- LAB-160-001: digital thermoregulator
Linetronic Technologies SA
Via Onorio Longhi 2 • 6864 Arzo • Mendrisio • Switzerland
tel. +41 91 630 07 03 • fax +41 91 630 07 19
email: info@lin-tech.ch
