Laboratory and Process Analyzers
Oxidation: Oxidation Characteristics of Lubricating Oil • Oxidation Stability • Oxidation Stability of Gasoline and Aviation Fuels • Oxidation Stability of Greases • Oxidation Stability of Mineral Insulating Oil • RBOT and TFOUT
Oxidation Stability
of Mineral Insulating Oil
ASTM D2440
IP 280
IEC61125
Oxidation Stability of Mineral Insulating Oil
This test method determines the resistance of mineral transformer oils to oxidation under prescribed accelerated aging conditions. Oxidation stability is measured by the propensity of oils to form sludge and acid products during oxidation. This test method is applicable to new oils, both uninhibited and inhibited, but is not well defined for used or reclaimed oils.
LT/OXS-198000/M
Oxidation Stability Bath for ASTM D2440
- Oil bath for the immersion of 6 standard test-tubes held by a double bottom
- Stainless steel structure
- Insulated double wall
- Six independent flowmeters that transfer oxygen at a 1 l/h rate
- Oil thermostatics is controlled by a digital thermoregulator PID with over-temperature alarm and probe PT100A
- Heavy duty motor stirrer
- Outlet system
- Complete of glassware
LT/OXS-198000-D/M
Oxidation Stability Apparatus "Dry Bath" for ASTM D2440, 6/8 test positions available
- Stainless steel structure and aluminium block with holes for the accomodation
of the glass tubes
- Digital thermoregulator PID with over-temperature alarm and probe PT100A
- Collector with 6/8 flowmeters 1 L/h O2 fitted with pin valves
- Glassware are included
(one set of Oil Receptacle and Head for each test position)
LAB-101-922 /CU10
Accessories
- LT/SP-302-SA: air pump
- LAB-100-332: digital stopwatch
- LAB-100-371/50: silicone oil, can of 25 litres
- LAB-102-501: drying tower
- LAB-101-922/CU10: catalyst copper, coil ext, ∅ 16 mm, 50 mm height, pack of 10 pcs.
- LAB-101-980: glassware
- LAB-101-987/D: digital soap bubble flowmeter
- T-AS41C: thermometer ASTM 41C
LAB-101-980
Accessories for IP 280
- LAB-101-980: glassware
- LAB-101-991: membrane filter 5 um ∅ 47 mm
- LAB-101-992: evaporating dish 50 ml
- LAB-101-993: filtration apparatus 1 lt
- LAB-101-132/500: conical flask 500 ml with ground glass stopper
- LT/DO-248000/N: natural ventilation oven
Spare Parts
- LAB-101-982: air reducer
- LAB-110-012: heater
- LAB-160-014: digital thermoregulator
- LAB-140-002: probe PT100
- LAB-150-015: static relay
Linetronic Technologies SA
Via Onorio Longhi 2 • 6864 Arzo • Mendrisio • Switzerland
tel. +41 91 630 07 03 • fax +41 91 630 07 19
email: info@lin-tech.ch