Flash Point: Abel • Cleveland • Pensky Martens • Tag Closed • Tag Open

---

Tag Closed

ASTM D56 - ASTM D3934 - ASTM D3941
BS 6664-3 (obs.) - BS 6664-4 (obs.)
DIN 55680 (obs.)
EN 456 (obs.) - EN 924
FTM 791-1101
IP 304-1 (obs.) - IP 304-2 (obs.) - IP 491 - IP 492
ISO 1516 - ISO 1523 - ISO 3679 - ISO 3680
JIS K 2265
NF T60-616 (obs.) - NF T60-617 (obs.)

Flash Point by Tag Closed Tester
This test method covers the determination of the flash point of liquids with a viscosity below 5.5 mm²/s (cSt) at 40°C (104°F), or below 9.5 mm²/s (cSt) at 25°C (77°F), and a flash point below 93°C (200°F).

Flash / No Flash Test - Equilibrium Method by a Closed Cup Apparatus
This test method covers the determination of whether a liquid complies with the closed-cup flash. This test method is limited to a temperature range between 0 and 110°C (32 and 230°F).

Flash Point by Equilibrium Method with a Closed Cup Apparatus
This test method covers the determination of the flash point of liquids in which the specimen and the air/vapour mixture above it are approximately in temperature equilibrium. This test method is limited to a temperature range between 0 and 110°C (32 and 230°F).

---

LT/TC-93000/M

Electric Tag Closed - ASTM D56 D3934 D3941

• Electrically heated by electronic regulator
• Mounted on a case painted with anti-acid epoxy products
• Test copper cup equipped with glide-device and gas-ignition
• Water bath and support-jacket made in brass
• Internal cooling coil

Power Supply

• 220Vac 50/60 Hz

Dimensions

• cm 40 × 40 × 50

Weight

• 8 kg

---

LT/TC-93000/DC

Electric Semi-Automatic Tag Closed - ASTM D56 D3934 D3941

• Electrically heated by electronic regulator manually settable that give the possibility to have different ramp rate
• Temperature range up to +120°C
• Mounted on a case painted with anti-acid epoxidic products
• Calibrated brass crucible
• Cooling coil for testing sample below ambient temperature (an external cooling source is needed)
• Electrical heater 250W or similar
• Cover with ignition system: electric lighter or gas flame
• Automatic shutter opening and dip-in of test flame by means of an electrical motor, activation by push button
• Built in cooling fan allow rapid cooling between tests
• PT100 probe Class A for sample temperature measuring
• Digital display with 0.1°C resolution

Power Supply

• 230 Vac - 50 Hz
• 115 Vac - 60 Hz

Dimensions

• cm 40 × 50 × 50

Weight

• 12 kg

---

Accessories

• LT/CB-40800-M/30: cryostatic bath -30°C
• LAB-100-749: gas reducer 30 mbar
• LAB-100-750: rubber tube-joint and tube 5 m
• T-AS57C: thermometer ASTM 57C
• T-AS57F: thermometer ASTM 57F
• T-AS9C: thermometer ASTM 9C - IP 15C
• T-AS9F: thermometer ASTM 9F - IP 15F

Spare Parts

• LAB-100-751: silicone tubing 5 m
• LAB-100-932: copper cup, pack of 2
• LAB-100-933: complete movement
• LAB-110-022: heater
• LAB-150-110: electronic regulator

---