Lubricating Greases and Oils: Consistency of Lubricating Greases• Corrosion Preventive Properties of Lubricating Greases • Dropping Point of Lubricating Grease • Dropping Point Ubbelhode • Evaporation Loss • Evaporation Loss of Lubricating Greases • Filterability of Lubricating Greases • Leakage Tendencies of Wheel Bearing Grease • Oil Separation from Lubricating Grease • Roll Stability of Lubricating Grease • Water Spray Resistance

---

Grease Worker
Consistency of Lubricating Greases

ASTM D217 - ASTM D1403

Cone penetration of lubricating grease.
Cover four procedures for measuring the consistency of lubricating greases by the penetration of a cone of specified dimensions, mass and finish.

---

LT/GW-67000/M

Manual Grease Worker ASTM D217 - D1403

• Brass body
• Screw cover with air valve and thermometer pass
• Piston with ground-slideway brass handle allowing connection to a base with lever (LT/GW-68000/M) or automatic machine (LT/GW-69000/M, LT/GW-70000/M)
• Disc complying with ASTM regulations and with 51 holes 6.35 mm diameter

---

LT/GW-68000/M

Slave Unit ASTM D217 - D1403

• For manipulating fats manually
• Adaptable to manual grease worker (LT/GW-67000/M)

---

LT/GW-69000/M

Automatic Grease Worker ASTM D217 - D1403

• 5 figure stroke counter
• Automatic preselector
• Adaptable to manual grease worker (LT/GW-67000/M)

---

LT/GW-70000/M

Automatic Grease Worker (2 places)

---

Power Supply

• 220 or 115 Vac 50/60 Hz

Dimensions

• cm 43 × 45 × 46

Weight

• kg 47 (LT/GW-69000/M)
• kg 54 (LT/GW-70000/M)

---

Spare Parts

• 5261: churn plate FTM with 51 × 6.35 mm holes.
• LAB-100-712-001: brass cup for GW-67000/M.
• LAB-100-712-002/SS: manipulator’s bell made in brass with shaft and handle for GW-67000/M.
• 7685: axe sealing gasket – pack of 10 pcs.

Accessories

• 5514: thermometer 0-120°C, stem < 4 mm.
• 5259: grease cutter with base.
• 5260: churn plate FTM with 270 × 1.58 mm holes.
• 5487: half-scale grease worker ASTM D1403, made in stainless steel, with 8 × 6.35 mm holes.
• LAB-100-714/adapt: adapter to use 5487 with LT/GW-70000.
• 5491: quarter-scale grease worker ASTM D1403, made in stainless steel, plate with 8 × 3.17 mm holes.
• LAB-100-718/adapt: adapter to use 5491 with LT/GW-70000.
• LT/CB-40800/M-30: Laboratory Cryostat Bath.
  • For temperatures up to -10°C.
  • Solid steel structure coated in epoxy anti-acid paint with upper side made in stainless-steel.
  • Internal chamber in seamless stainless steel with rounded corners for efficient circulation.
  • Easy cleaning thanks to atmospheric drain on the bottom of the chamber.
  • Control head equipped with digital display showing set and actual temperature, display resolution 0,1°C.
  • Temperature range from -10°C to +99,9°C, accuracy to ±0,5°C to +37°C.
  • Manual safety thermostat against overtemperature.
  • Circulating pump: prevalence 4 m / 2 l -min ~ prevalence 1 m / 12 l - min.
  • Weight: 20 kg (empty).
  • Dimensions: width 33.5 cm, depth 47.0 cm, height 63.0 cm.
  • Internal bath dimensions: width 10.5 cm, depth 12.5 cm, height 15.0 cm.
  • Capacity: 8 liters.
  • Power supply: 220 Vac or 115 Vac 50/60 Hz.
  • Max. consumption: 1500 Watt.
  • DIN 12880 class 2 construction type.
• 5895: spatula for grease, stainless steel with wood handle.
• LT/GW-67000/M-SS: Manual Grease Worker ASTM D217.
  • Stainless steel body.
  • Screw cover with air valve and thermometer pass.
  • Piston with ground-slideway stainless steel handle allowing connection to a base with lever (art. LT/GW-68000/M).
  • Disc complying with ASTM regulations with 51 holes of 6.35 mm diameter.

---

---