Additional Instruments • Aniline • Bitumen • Blends • Calorimetry • Centrifuge • Cold Behaviours • Colourimetry • Corrosion • Demulsibility and Foaming • Densimetry • Distillation • Flash Point • Gum - Rubber • Hydrometers • LPG • Lubricating Greases and Oils • Oxidation • Penetration • Residues • Rust • Sediments • Sulfur • Thermometers • Vapour Pressure • Viscosimetry • Water • Wax

---

Evaporation Bath

ASTM D381
DIN 51784
IP 131
IP 540
ISO 6246

Gum Content in Fuels by Jet Evaporation.
This test method covers the determination of the existent gum content of aviation fuels, and the gum content of motor gasolines or other volatile distillates in their finished form (including those containing alcohol and ether type oxygenates and deposit control additives) at the time of test.

---

LT/EB-241000/M
Gum Content in Fuels by Jet Evaporation Air and Steam

• Compact structure painted with anti-acid epoxidy products.
• Rectangular aluminium metal block bath deeply coated equipped with 8 × removable adapters.
• 2 × dedicated inlet lines.
  • Air inlet with in-line flowmeter for monitor the instant air-flow and regulation ball valve.
  • Steam inlet with distribution manifold and ball valve for regulating the flow.
• 8 × jets (one for each test place) fitted with its conical adapters with 500 to 600-micron screens.
• Temperature controlled by a digital thermoregulator PID with overtemperature alarm and probe PT100 A class with 0.1°C resolution and 0.5°C precision.
• Safety manual thermostat for overheating preventing with warning lamp.
• 8 × glass beaker 100 ml capacity.

Dimensions

• 40 × 43 × 56 cm.

Temperature Range

• Ambient to +246°C.

Consumption

• 2200 Watt.
• + 400 Watt superheater if optionally added.

Power Supply

• 220 Vac or 115 Vac 50/60 Hz.

Factory options for LT/EB-241000/M

• D381-SH: Super-heater option.

---

LT/EB-241400/M
Gum Content in Fuels by Jet Evaporation Air and Steam

• Compact structure painted with anti-acid epoxidy products.
• Circular aluminium metal block bath deeply coated equipped with 4 × removable adapters.
• 2 × dedicated inlet lines.
  • Air inlet with in-line flowmeter for monitor the instant air-flow and regulation ball valve.
  • Steam inlet with distribution manifold and ball valve for regulating the flow.
• 4 × jets (one for each test place) fitted with its conical adapters with 500 to 600-micron screens.
• Temperature controlled by a digital thermoregulator PID with overtemperature alarm and probe PT100 A class with 0.1°C resolution and 0.5°C precision.
• Safety manual thermostat for overheating preventing with warning lamp.
• 4 × glass beaker 100 ml capacity.

Dimensions

• 40 × 43 × 56 cm.

Temperature Range

• Ambient to +246°C.

Consumption

• 1800 Watt.
• + 400 Watt superheater if optionally added.

Power Supply

• 220 Vac or 115 Vac 50/60 Hz.

---

LT/EB-241500/M
Gum Content in Fuels by Jet Evaporation Air and Steam

• Compact structure painted with anti-acid epoxidy products.
• Circular aluminium metal block bath deeply coated equipped with 5 × removable adapters.
• 2 × dedicated inlet lines.
  • Air inlet with in-line flowmeter for monitor the instant air-flow and regulation ball valve.
  • Steam inlet with distribution manifold and ball valve for regulating the flow.
• 5 × jets (one for each test place) fitted with its conical adapters with 500 to 600-micron screens.
• Temperature controlled by a digital thermoregulator PID with overtemperature alarm and probe PT100 A class with 0.1°C resolution and 0.5°C precision.
• Safety manual thermostat for overheating preventing with warning lamp.
• 5 × glass beaker 100 ml capacity.

Dimensions

• 40 × 43 × 56 cm.

Temperature Range

• Ambient to +246°C.

Consumption

• 1800 Watt
• + 400 Watt superheater if optionally added.

Power Supply

• 220 Vac or 115 Vac 50/60 Hz.

Factory options for LT/EB-241400/M and LT/EB-241500/M

• D381-SH: Super-heater option for 4 and 5 positions.

---

Accessories

• T-AS3C: Thermometer ASTM 3C.
• 5550: Tongs made in stainless steel with corks protection, total length 250 mm.

Steam Accessories

• 1000160: Industrial steam generator.
  • Steam supply: 19.5 Kg. / h.
  • Heating power installed: 15-18 Kw.
  • Steam temperature @ 3.5 bar: 152°C.
  • Power supply: 400 V, 3 ph, 50 Hz.
  • Working pressure: 5 bar / Max. working pressure: 5,5 bar.
  • Water: must be connected to a water line (boiler capacity 10 liters).
  • Delivery tube 3 meters.

• 1000128: Laboratory steam generator.
  • Steam supply: 5.2 kg / h.
  • Power: 4 KW.
  • Power supply: 230 V, 1 ph, 50 Hz.
  • Pressure: 4.5 bar.
  • Steam temperature: ~ +149°C.
  • Water: rear water tank of 20 liters.
  • Delivery tube 3 meters.
• OilLab 142: Steam verification kit composed by 2000 ml graduated glass cylinder and copper tube.

Air Accessories

• LT/FA-247000/M: Side channel flow apparatus.
  • Full die-cast aluminium construction.
  • No contact between rotating and static components.
  • Motor power: 2.20 kW.
  • Power supply: 230 V 50/60 Hz or 115 Vac.
  • Designed flow rate: 150 m³/h - 0 mbar.
  • Noise level: 66 dB(A).
  • Weight: 27 Kg.
  • Connection tube for instrument, 1 meter.

• 5210: Air filter for flow apparatus.
  • Kit composed by filter support with screwing cover made in painted steel, filter element with particle retain and adapter for connection to flow apparatus.
• 7084: Filter element (spare).
• 3189: Mass flow meter.
  • Flow mass range from 1.2 to 60 nl/min.
  • Digital display readout.
  • Connection joints ¼”.
  • Power supply, battery or micro-usb power supply.
  • Operating pressure 0.2 – 11 bar.
  • Made in anodized aluminium, Fkm seals.
  • Repeatability ± 0.5% of full scale.

Spare Parts

• 1052: Pyrex® Beaker.
• 3574: Digital thermoregulator.
• 3114: Heating cartridge 100 mm, pack of 2 pcs.
• 7082: Air jet complete, pack of 4 pcs.
• 5476: Spare metallic mesh, pack of 10 pcs.

---