Viscosimetry: Brookfield ® Original Viscometer • Calibrated Glass Capillary • B.R.T.A. Viscometer • Engler Viscometer • Ford Viscometer • Low Temperatures Viscometer Bath • Redwood Viscometer • Saybolt Viscometer • Viscometer Bath • Viscometer Tube Cleaner and Dryer

---

Redwood Viscometer

IP 70 (obs.)

Redwood Viscosity
No. 1 Determines viscosity of oils not exceeding 2000 seconds at the test temperature.
No. 2 Determines viscosity of oils exceeding 2000 seconds at the test temperature.

---

LT/RV-12000/M

Digital Redwood Viscometer no. 1 - IP 70 (obs.)

• Water bath made in stainless steel 18/8, insulated double wall,
  front opened jacket
• Lid with stainless steel heater
• Stirrer
• Cooling coil
• Digital thermoregulator PID with over temperature alarm and PT100 A probe
• Calibrated brass oil cup with orifice no. 1
• Fitted with closing-ball-ended

---

LT/RV-12100/M

Digital Redwood Viscometer no. 1 - IP 70 (obs.) - 2 places

---

LT/RV-12200/M

Digital Redwood Viscometer no. 2 - IP 70 (obs.) - 2 places

• Water bath made in stainless steel 18/8, insulated double wall,
  front opened jacket
• Digital thermoregulator PID with over temperature alarm and PT100 A probe
• Lid with double stainless steel heater
• Motor stirrer with shaft
• Atmospheric drain with drain cock
• Cooling coil with relevant joints for the connection to an external cooling source
• Calibrated brass oil cup

---

Power Supply

• 220Vac 50/60 Hz

Dimensions

• cm 50 × 50 × 70

Weight

• kg 25

---

Accessories

• LAB-100-103: Kohlrausch receiving flask 50 ml, pack of 3
• LAB-100-332: digital stopwatch
• LAB-100-161: filter funnel with stainless steel wire mesh

Thermometers

• T-IP8C: thermometer IP 8C Redwood low range 0 °C …+45 °C div. 0.2
• T-IP9C: thermometer IP 9C Redwood medium range +40 °C …+85 °C div. 0.2
• T-IP10C: thermometer IP 10C Redwood high range +76 °C …+122 °C div. 0.2

Silicon Oil

• LAB-100-371/50: silicon oil - viscosity approx. 50 mm2 / S @ 25 °C suitable
  for working temperatures up to +150 °C - Can of 25 litres

Spare Parts

• LAB-120-001: o-ring set for oil cup composed by
  1 o-ring big and 1 o-ring medium
• LAB-120-002: o-ring small for filling stopper, pack of 3
• LAB-120-003: closing ball ended rod

---