Automatic Analysers → NewLab Range • OilLab Range • Thermofat • OnLine Range
Filterability of Lubricating Oils • Ring and Ball • Foaming Tester • Oxidation Stability • Evaporation Bath • RBOT & TFOUT • RPVOT • Noack • Pensky Martens • Leonardo Pensky Martens • Golleo Abel+Pensky • Aniline Point • Penetration • R.E.C.C. • Abel • Cleveland • Tag • Tag - 6901 • ASVP • Reid Vapour Pressure • Ductilometer • Herschel Emulsifying • Copper Corrosion of Electric Vehicle Fluids • Saybolt Viscometer • Distillation

---

OilLab 6901 - Tag

ASTM D56
ASTM D3278
ASTM D3941

Subject
Flash point on petroleum products having a flash point between ambient temperature and +93°C. Suitable for flash point detection on different substances and (NO) waste materials, solvents…

Automatic analyzer for the determination of the flash point in closed cup, TAG

• Calibrated test cup with sample level mark.
• Ignition system: electric lighter.
• Control system based on microprocessor.
• Measuring temperature probe: platinum resistance PT100 class A, resolution 0.1°C.
• Pressure sensor: built-in sensor with automatic correction of results to a barometric pressure of 101.3 kPa automatically performed by the software at the end of analysis.
• Detection system: a single multi-detector combines the ionization detector and the thermal detector.
• Electrical heating with heating rates as per standard procedures.
• Measuring range: +10...+110°C.
• Cooling system: Peltier module (+10°C) or by connection to external chiller (-30°C).
• Safety devices:
  • Automatic diagnostic in case of breakage of the sample temperature probe and thermal sensors;
  • Automatic fire detection system;
  • Overheating protection with auto shut off during the test;
  • Automatic fire detection and extinguisher system.

Integrated Touch Screen Panel PC

• TFT/LCD 8.4”
• Resolution 1024 × 768, 16.2 M colours
• 2 × USB ports for connection to an external printer
• 1 × ethernet port for LAN and LIMS network
• Storage capacity for more than 65’000 analysis

Lablink Software

• Automatic execution of the analysis in accordance to the selected procedure.
• Automatic handling of samples with unknown flash point.
• Display in real time of all the analysis parameters and status.
• Fields for introduction of operator and product name.
• Expected flash point temperature programmable.
• Audible alarm and displayed messages at the end of the analysis and in case of errors and/or malfunctions.
• Configuration menu with up to 20 preset samples and expected flash point.
• Automatic barometric correction of results.

Electrical Supply

• 220V ± 15% / 50 to 60 Hz
• 115V ± 15% / 60 Hz

Ambient Temperature

• Max 35°C
• H.R. 80%

Dimensions

• width 37 cm
• depth 52 cm
• height 32 cm

Weight

• 34 Kg

---