Automatic Analysers → NewLab Range • OilLab Range • Thermofat • OnLine Range
Filterability of Lubricating Oils • Ring and Ball • Foaming Tester • Oxidation Stability • Evaporation Bath • RPVOT (570) • RPVOT (571) • Noack • Air Release • Pensky Martens • Leonardo Pensky Martens • Golleo Abel+Pensky • Aniline Point • Penetration • R.E.C.C. • Abel • Cleveland • Tag • Tag - 6901 • Reid Vapour Pressure • Ductilometer • Herschel Emulsifying • Saybolt Viscometer • Distillation

---

OilLab 880
Saybolt Viscometer

ASTM D88
ASTM D7496
ASTM E102
IP 55
FTM 791-0304
JIS K 2207

---

Subject

ASTM D88 Saybolt Viscosity: covers the measurement of viscosities of petroleum products at temperature between 21° and 99°C (70° ÷ 210°F)
ASTM D7496: This test method utilizes the Saybolt Furol viscometer to measure the consistency of emulsified asphalt. It is applicable to all the emulsified asphalts specified in Specifications D977 and D2397.
ASTM E 102 Saybolt Viscosity: covers the measurement of viscosities of petroleum products at temperature between 121° and 232°C (250° ÷ 450°F)

---

Principle of detection

The sample is heated and mantained stable at test temperature. Once the analisys start the valve is opened and a real time CCD camera will observe the flow of the sample until reach the level mark and close the valve. The time and relevant viscosity index (SUS and/or SFS) are automatically calculated.

---

Measuring Temperature Devices

• Bath temperature: PT100 sensor stainless and steel

Detection system

• Integrate CMOS sensor high definition
• Integrate LED backlight

---

Heater

• Electrical heating

Safety Devices

• Safety thermostat over-temperature cut-out

---

Software Features

• User friendly interface
• All analytical parameters recorded
• Customizable analysis parameters and methods
• Customizable results report
• Printable graphs and results
• Orifices calibration procedure with reference sample
• Centering procedure of the level mark of the receiver flask
• Automatic open/close valves
• Automatic viscosity calculation
• Audible chimie alarm for over-temperature
• Selectable temperature displaying: °C / °F

The software includes:

Analysis Menu

• Automatic execution of the analysis in accordance to the selected procedure (Standard method as per ASTM / IP / ISO / EN / DIN… norms of reference)
• Display in real time of all the analysis parameters and status
• Fields for introduction of operator and product name
• Audible alarm and displayed messages at the end of the analysis and in case of errors and/or malfunctions

Diagnostic Menu

• Direct access to all analog, digital, inputs and outputs
• Selectable value displaying: °C / Volt

Calibration Menu

• Up to 100 calibration points (standard with 5 and dynamic with up to 100 points)
• Last calibration date referred to each single probe displayed and relevant data printable
• Display of calibration diagram
• Comparative with reference thermometer
• Selection calibration due date

Data Utilities

• Archive viewer for files recall
• All analysis stored in Excel® compatible format

Analysis storage

• Storage capacity for more than 65.000 analysis
• Export of test results files in the most common formats Excel and PDF
• Reading interval of PT100 sample from 0 to 450 °C with resolution 0.1 °C

Integrated Touch Screen Panel PC

• TFT/LCD 8.4"
• Resolution 1024 × 768, 16.2 M colours
• 1 × USB ports for connection to an external printer

---

Electrical Supply

• 220V ± 15% / 50 to 60 Hz
• 115V ± 15% / 60 Hz

Ambient Temperature

• Max 35 °C
• H.R. 80%

---

Weight

• 45 kg

Dimensions

• width: 43 cm
• depth: 38 cm
• height: 60 cm

---

Accessories

• LAB-100-161: filter funnel with stainless steel wire mesh
• LAB-100-162: Saybolt flask 60 ml
• LAB-100-163: thermometer support
• LAB-100-164: withdrawal tube
• LAB-100-167: movement ring ASTM E 102
• LAB-100-168: suction pipette

Spare Parts

• LAB-100-161: filter funnel with stainless steel wire mesh
• LAB-100-162: Saybolt flask
• LAB-100-164: withdrawal tube
• LAB-100-165: universal orifice
• LAB-100-166: furol orifice
• LAB-100-168: suction pipette
• LAB-100-371: silicone oil 25 litres
• LAB-140-001/A: PT100 probe
• LAB-11-0012: heater

---